SPT UF-213SS Operating Instructions Manual page 2

PREPARING TO INSALL
READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY
Ventilation
There is need of good ventilation around the appliance for dissipation of
heat, high efficiency of refrigeration and low power consumption. For this
purpose, please allow a minimum of 4" around the unit for proper air
circulation
A clear space should be left to open the door to 160º
Protection from Moisture
Avoid placing unit where heavy moisture is present, this is to minimize
possibility of metal parts rusting. Never spray water onto the unit.
Never spray water directly onto the unit – which may damage the insulation.
Protection from Heat
Keep unit away from any heat source and direct sunlight.
Location
Unit should be placed on a flat and solid ground, which can support the unit
when fully loaded. Adjust the leveling legs so the unit is firmly positioned on
the floor. Do not place unit near anything that may echo.
Keep Away from Danger
Do not place appliance near any combustibles such as gas, petrol, alcohol,
lacquer and etc. The above mentioned should not be stored in the freezer.
Moving
Secure all loose items (such as shelves and ice tray). Unit should never be
set horizontally, upside down or declined more than 45º.
1