Subscribe to Our Youtube Channel
Related Manuals for SPT SF-1670M
Summary of Contents for SPT SF-1670M
- Page 1 16” OUTDOOR MISTING FAN Model: SF-1670M READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USE...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: WARNING: this fan is supplied with a grounded plug and GFCI. To reduce the risk of electrical shock, make sure it is connected only to a PROPERLY grounded outlet. - Page 3 RULES FOR SAFE OPERATION: Never insert fingers or any other objects through the grill guard when fan is in operation. Disconnect the fan when moving from one location to another. Disconnect the fan when removing guards for cleaning. Be sure fan is on a stable and flat surface when in operation. DO NOT use when raining.
-
Page 4: Parts Identification
PARTS IDENTIFICATION ASSEMBLY INSTRUCTIONS 1. On the lower shaft pole, locate and remove the screw from the top end of the shaft. Insert shaft to main body, align the screw openings on the main body to the one on the shaft. Re-fasten the screw. - Page 5 3. Place aluminum tube over lower shaft and insert shaft into base. Gently lay unit on its side and secure the shaft to base with lock nut (turn clockwise). Grill and Blade Assembly A. On the motor housing: unscrew and remove the guard lock nut (turn counter-clockwise). B.
-
Page 6: Operating Instructions
OPERATING INSTRUCTIONS Using the Remote Memory function: The remote will remember your last settings after power off and resume fan to those settings when turned on again (fan speed, wind mode and oscillation mode); for the exception of timer setting – which will be cleared. The LED display will go into sleep mode after 30 seconds of inactivity. - Page 7 Using the Control Panel The same functions keys found on the remote can be found on the unit’s control panel. ON/SPEED: o Press to turn unit on. Fan will start in Normal mode, on speed 3 and switch to speed 1 after 3 seconds.
- Page 8 NATURAL MODE PATTERN Natural Mode with High Speed (3) Natural Mode with Med Speed (2) Natural Mode with Low Speed (1) SLEEP MODE PATTERN In Sleep Mode, the wind pattern duplicates that of Natural mode. The only difference is that the unit will automatically drop one speed every 30 minutes until it reaches Low and remain there.
- Page 9 Please do not attempt to open the motor housing of the fan; doing so may cause damage to the fan or personal injury as well as voiding your warranty. To purchase replacement nozzles, contact Sunpentown Customer Service at 800-330-0388.
-
Page 10: Care And Storage
CARE & STORAGE Turn off power and unplug unit before cleaning. Use only a soft moistened cloth with a mild soap solution to clean the fan. Do not immerse fan in water. Do not use gasoline thinners or other chemicals to clean fan. To dismantle for cleaning or long term storage, follow the assembly instructions in reverse order. -
Page 11: Technical Specifications
TECHNICAL SPECIFICATIONS Model SF-1670M Input voltage AC 120V~60Hz Power consumption Air flow 2223cfm (max) Unit dimension 16.5” base diameter x 45” high TROUBLESHOOTING Make sure unit is plugged into a live socket No power Press RESET button on the GFCI plug... - Page 12 This guarantee is subject to the following terms: Sunpentown must be notified of the fault. Proof of purchase must be presented to Sunpentown’s nominated representative. The warranty will be void if the product if modified, misused or repaired by an unauthorized person.
Need help?
Do you have a question about the SF-1670M and is the answer not in the manual?
Questions and answers