Related Manuals for SPT SF-16D31
Summary of Contents for SPT SF-16D31
- Page 1 OWNER’S MANUAL 16” Stand Fan Model: SF-16D31 READ AND SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only.
- Page 2 CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
- Page 3 ASSEMBLY INSTRUCTION 1. Take out the base tube, three butterfly screws for fixed base and the round base from the packing carton; 2. Insert the tube to the round base, be sure to make the positioning screw align with the base; 3.
- Page 4 Blade Set Fig.3 Fig.4 Fig.5 Fig.6 Fig.7 Remote controller On/Off Battery Drive plate Battery cover PRO/Timer Mode OPERATING INSTRUCTIONS Plug in the power adapter, after a "beep" tone, the fan is on standby. I. Remote Controller (Fig.6) “ ” ON/OFF KEY The standby mode, press this button, the fan to memory stall start.
- Page 5 “ ” OSC KEY After the fan starts, repeatedly touch this button to start or stop oscillation. “ ” PRO KEY Under power-on state, timed power-off can be set. Press the PRO button; it starts the timing power-off state. "Timing" and icon displayed on the fan display will flash once per second, the rotate the drive plate clockwise, the fan display will display 0.5 →...
- Page 6 IV. Height Adjustment Lowing: lift up the head with a hand, unscrew the fastening knob counterclockwise with the other hand, slowly lower the head to an appropriate height, and tighten the knob clockwise. Rising: lift up the head with a hand, unscrew the fastening knob counterclockwise slowly with the other hand, rises up the head to a proper height, and tighten the knob clockwise.
- Page 7 USER SERVICING INSTRUCTIONS a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. b) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. c) Remove fuse carefully. Insert the tip of your tool into fuse slot (close with the terminal), then prize the fuse gradually and slowly, but not overexert.
- Page 8 Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: Sunpentown must be noti ed of the fault.
Need help?
Do you have a question about the SF-16D31 and is the answer not in the manual?
Questions and answers