Over time the Keypad may become worn and fail to function properly.
Replacing Keypad
Tools Needed:
Phillips Head Screwdriver
1. remove the Back Cover of the LCD Monitor (Figure a).
2. Carefully pull the ribbon Cable out of the connector (Figure B & C).
. Gently lay the LCD on it's back and peel off the old Keypad (Figure D).
. remove the old Keypad from the slot it the plastic (Figure E).
(Continued on next page)
Figure a
Replacing Keypad
Ribbon Cable
Figure B
Keypad
Figure D
Parts Needed:
Keypad Part# 001-2033
Figure E
Ribbon Cable
Figure C
Nautilus
LCD Users Manual
®
7