Sony TV & Home A/V Connection Manual page 4

Hide thumbs Also See for TV & Home A/V:

5. Connect a composite A/V cable to:

a. LINE OUT jacks on the VCR/DVD combo unit

b. VIDEO input jacks on the TV

1. Turn on the TV.

2. Turn on the set-top box.

3. Tune the TV to the component (Y/Pb/Pr) video input to which the set-top box is

connected, for example, VIDEO 5.

If there is picture and sound on the TV, you have connected the component video and

corresponding audio cable between the TV and the set-top box correctly.

4. Turn on the VCR/DVD combo unit.

5. Select the line input on the VCR/DVD combo unit to which the set-top box is connected,

for example, LINE 1 (L1) or LINE 2 (L2).

6. Tune the TV to the composite video input to which the VCR/DVD is connected, for

example, VIDEO 1.

If you have picture and sound on the TV, you have connected the A/V cables correctly.

7. Tune the TV to the component video input to which the VCR/DVD unit is connected, for

example VIDEO 4.

8. Insert a DVD movie into the VCR/DVD combo unit.

9. Press the PLAY button on the VCR/DVD combo unit remote control.

If you have picture and sound on the TV, you have connected the component video and

corresponding audio cable between the TV and the VCR/DVD combo unit correctly.

Note: It may be necessary to set the source on the VCR/DVD combo unit to DVD. Your remote

control should have a button to switch between the sources. Refer to the operating instructions

supplied with the VCR/DVD combo unit for more information.

Watch satellite or cable TV

1. Turn on the TV.

2. Turn on the set-top box.

3. Tune the TV to the component (Y/Pb/Pr) video input to which the set-top box is

connected, for example, VIDEO 5.

4. Tune the set-top box to the desired channel.

Watch a DVD

1. Turn on the TV.

2. Turn on the VCR/DVD combo unit.

3. Tune the TV to the component video input to which the VCR/DVD unit is connected, for

example VIDEO 4.

4. Insert a DVD into the VCR/DVD combo unit.

5. Press the PLAY button on the VCR/DVD combo unit remote control.

Note: It may be necessary to set the source on the VCR/DVD combo unit to DVD. Your

remote control should have a button to switch between the sources. Refer to the operating

instructions supplied with the VCR/DVD combo unit for more information.