Sony TV & Home A/V Connection Manual page 3

Hide thumbs Also See for TV & Home A/V:

We recommend this hookup to view cable or satellite service, VHS and DVD movies on your

TV. This connection should be used if your TV, set-top box, and VCR/DVD combo unit have

component (Y/Pb/Pr) video connectors. This connection is most commonly used for high-

definition programming.

(2) Component (Y/Pb/Pr) video cables

(2) Composite audio cables

(2) Composite A/V cables

1. Connect the coaxial cable from the wall to the RF IN jack on the set-top box.

Note: If your satellite service does not include local channels, you may want to connect an

antenna to the TV IN jack on your satellite receiver. Refer to the operating instructions for specific

information on switching between satellite and local broadcasts.

2. Connect a component video cable and a composite audio cable to:

a. COMPONENT LINE OUT and AUDIO OUT jacks on the set-top box

b. COMPONENT VIDEO IN and AUDIO IN jacks on the TV

Note: Be sure to match the colors of the cable connectors with the colors of the jacks.

3. Connect a component video cable and a composite audio cable to:

a. COMPONENT LINE OUT and AUDIO OUT jacks on the VCR/DVD

combo unit

b. COMPONENT VIDEO IN and AUDIO IN jacks on the TV

4. Connect a composite A/V cable to:

a. LINE OUT jacks on the set-top box

b. LINE IN jacks on the VCR/DVD combo unit