Sony TV & Home A/V Connection Manual page 5

Watch a DVD or BD movie
1. Turn on the TV.
2. Turn on the DVD / BD player.
3. Turn on the A/V receiver.
4. Tune the TV to the composite video input to which the A/V receiver is connected, for
example, VIDEO 1.
5. Select the line input on the A/V receiver in which the DVD / BD player is connected.
6. Insert the DVD or BD movie you want to watch into the DVD / BD player.
7. Press the PLAY button on the DVD / BD player remote control.
Note: DVD players can only play standard DVDs. BD players can play both BDs and standard
DVDs.
The input jacks on an A/V receiver, with the exception of the PHONO IN jack, are
interchangeable, for example, you may connect a CD player into an input marked MiniDisc.
If you are connecting a turntable and the volume is low, the turntable may not have a built in
pre-amplifier. Use the PHONO IN jack on the A/V receiver if one is available. Do not connect
other devices to this jack.
The connection instructions are the same for all audio devices. Repeat the connection
instructions for each of your audio devices.
CD Player
(1) Composite audio cable
MiniDisc player
(1) Composite audio cable
Tape Deck (1) Composite audio cable
Turntable
(1) Composite audio cable
1. Connect the composite audio cable to:
a. LINE OUT jacks of the audio component.
b. LINE IN jacks on the back of the A/V receiver.
Note: If your audio device and A/V receiver both have an optical audio or digital
coaxial jack, use this connector instead of the red and white audio cables. With this
connection, you can receive digital audio to the A/V receiver.
© 2010 Sony Electronics Inc. All rights reserved.
(1) Digital coaxial or
optical cable
(1) Digital coaxial or
optical cable
5