Sony TV & Home A/V Connection Manual page 4

4. Connect a composite video cable to:
a. MONITOR OUT jack on the A/V receiver
b. VIDEO IN jack on the TV
Notes:
If your equipment has S-Video jacks, use this connection instead of the yellow
composite cable. The S-Video connection provides a higher quality video image.
Connect the red and white audio cables for the sound.
Follow the instructions supplied with your A/V receiver to connect and test your
speakers.
1. Turn on the TV.
2. Turn on the set-top box.
3. Turn on the A/V receiver.
4. Tune the TV to the composite video input to which the A/V receiver is connected, for
example, VIDEO 1.
5. Select the line input on the A/V receiver to which the set-top box is connected, for
example, TV/SAT.
If there is a picture on the TV and sound from A/V receiver speakers, you have connected
the cable box/satellite receiver and A/V receiver correctly.
6. Turn on the DVD / BD player
7. Select the line input on the A/V receiver to which the DVD / BD player is connected, for
example, DVD.
8. Insert a DVD or BD movie into the DVD / BD player.
Note: DVD players can only play standard DVDs. BD players can play both BDs and standard
DVDs.
9. Press the PLAY button on the DVD / BD player remote control.
If there is a picture on the TV and sound from A/V receiver speakers, you have connected
the DVD / BD player and A/V receiver correctly.
Watch TV
1. Turn on the TV.
2. Turn on the set-top box.
3. Turn on the A/V receiver.
4. Tune the TV to the composite video input in which the A/V receiver is connected, for
example, VIDEO 1.
5. Select the line input on the A/V receiver to which the set-top box is connected, for
example, TV/SAT.
6. Tune the set-top box to the desired channel.
© 2010 Sony Electronics Inc. All rights reserved.
4