WWAN/LCD DIP Switch (For Win8 model)
WWAN/LCD DIP Switch Location
WWAN/LCD DIP Switch Location
Note: There are four DIP Switches.
1. The first three DIP Switch setting is different by the type of system(Win7 or Win8).
A. When the model is Win7 system, 1st to 3rd bits are setting for WWAN/GPS.
B. When the model is Win8 system, 1st bit is setting for WWAN and 2nd ,3rd bit
are setting for LCD.
2. The fourth one is used for the Anti-Theft.
2 The fourth one is used for the Anti Theft
The first three DIP switch setting is different by the type of system(Win7 or Win8) .
For setting method, please refer to the table.
1. The first one is used for WWAN Card, please set them as below.
With WWAN SKUS
With
Without WWAN SKUS
t WWAN SKUS
2. The second and third are used for LCD DIP Switch setting.
13.3/1600x900/LED/ClearLikeAG/Flat/CMI (A-1890-097-A/A-1940-862-A)
13.3/1366X768/LED/CLEARLIKEAG/FLAT/AUO (A-1890-100-A/A-1898-069-A)
13.3/1366X768/LED/CLEARLIKEAG/FLAT/CMI (A-1890-098-A/A-1890-099-A)
3.The fourth one is used for Intel Anti-Theft setting.
3 The fourth one is used for Intel Anti Theft setting
When replacing Main Board, not to change the setting on removed Main Board.
With Intel Anti-Theft
Without Intel Anti-Theft
3-12
2(b)
(EN
ND)
, p
g
[Sony Confidential]
SVS131 Series (9-890-952-XX)