Cordless Scanner Specific Functions; Rfid Specific Functions - Socket SocketScan SDK User Manual

•
IsScannerConnectedEx() checks whether a specified scanner is connected
3.5 C S
ORDLESS
•
ScanEnableCHS() activates the Cordless Scanner (CS) and loads its driver
•
ScanDisableCHS() deactivates the Cordless Scanner and unloads its driver
•
ScanSendCmdtoCHS() sends the Cordless Scanner configuration commands
3.6 RFID S
PECIFIC
•
ScanRFIDSelectTag() selects one or more tags
•
ScanRFIDReadTag() reads one or more data blocks from a tag
•
ScanRFIDGetData() gets the response and data from a Select, Read, or Write tag command
•
ScanRFIDWriteTag() writes one or more data blocks to a tag
•
ScanRFIDLockTag() locks one or more blocks on a tag to prevent future writes
April 8, 2010
Document#: 6410-00147 K
S F
CANNER PECIFIC UNCTIONS
F
UNCTIONS
Page 12
Revision 2.28