Page 1
XR 1001 Electronic Crossover Operating Manual Ashly Audio Inc. 847 Holt Road, Webster, NY 14580-9103 Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739 www.ashly.com All Trademarks referred to herein, are the property of their respective owners. R-1012 All Rights Reserved...
Page 2
Introduction - 2 Introduction About Ashly Safety Congratulations on your purchase of an Ashly XR 1001 Crossover. This crossover is the XR Crossovers – 3 product of an intensive research effort which combined a reexamination of traditional Connectors & Cables – 3 crossover theory with practical field use.
Page 3
Inputs Inputs are 20KΩ active balanced, or 10KΩ unbalanced. The inputs of all Ashly crossovers are in phase with the outputs. Outputs The outputs are low impedance (200Ω typical) pseudo-balanced using either connector.
Page 4
XR Crossovers – 3 Connectors & Cables – 3 Physical Description - 4 Front Panel Installation – 5 The XR 1001 is 1RU, and weighs approximately 10 pounds. Typical Applications - 6 XR-1001 Front Panel Troubleshooting - 7 Dimensions - 7 Power - Connects AC power to the unit.
Page 5
Operator Manual – XR Series Crossovers Page - 5 Introduction - 2 XR Crossovers – 3 Connectors & Cables – 3 Physical Description - 4 XR-1001 Back Panel Installation – 5 1. Inputs - For unbalanced inputs, the signal should be on the (+) connection and the (-) connection tied to ground. A General Requirements mono 1/4”...
Page 6
The mono low output is the summed signal from both channel’s low output level controls. XR 1001 Mono 3-Way Operation The XR 1001 can also be used as a mono 3-way crossover by pressing in the Mode switch. Use channel 2 input only. With the Mono 3 Way mode switch pressed in, all active outputs will have their status LED light up.
Note: Unshielded cables, improperly wired connections, and cable with broken strands (shorts, etc.) are the most common problems. Make sure you use good quality cable with connectors soldered firmly on the correct pin. When in doubt, get in touch with your Ashly dealer.
Page 8
AUDIO, INC. in accordance with the following warranty statement. Typical Applications - 6 Troubleshooting - 8 ASHLY AUDIO, INC. warrants to the owner of this product that it will be free from defects in Troubleshooting - 7 Spec Table - 9 workmanship and materials for a period of FIVE years from the original-date-of-purchase.
Need help?
Do you have a question about the XR 1001 and is the answer not in the manual?
Questions and answers