Honeywell HS-160R Series Owner's Manual page 5

OPERATION (cont.)
• You will see a red light illuminated on the control panel of
the fan showing you what speed your fan is on (Fig. 9).
• To stop the oscillation feature, pull up hard on the
Oscillation Control Knob until you feel two clicks. To
restart oscillation feature press button down (Fig. 10).
• Tilt the fan head to desired angle.
• To turn the fan off press the "OFF" button.
NOTE: Once your fan is off, the next time you turn
it on it will automatically default to the last used
speed setting. You can then adjust the speed as
desired.
FEATURES
Breeze: To activate the breeze feature, press the "BREEZE" button once on your
remote control or on the control panel on the fan. Your fan will now speed up
and slow down to simulate outdoor air-flow. This feature can be used when your
fan is on any speed setting. While using the fan in "BREEZE" mode, if you want
to return to standard fan speed operation, press the "BREEZE" button once. Your
fan will no longer cycle through its outdoor wind function.
Timer: You can set your fan to conveniently turn itself off within two, four or
eight hours.
• This feature operates similar to the speed setting function. To use this feature
press the "TIMER" button.
• The time you have set will be displayed by the illuminated green light on the
fan control panel.
From Any Speed Setting:
1 press = 2 hours - light glows under 2
2 press = 4 hours - light glows under 4
3 press = 8 hours - light glows under 8
NOTE: If you shut off your fan in "Breeze" mode, the next time you
turn your fan on it will be in "Breeze" Mode. If your fan shuts
itself off as a result of "Timer" mode running out, the next time
you turn your fan on it will default to the last used speed setting.
Fig. 9
illuminated
TIMER ON/SPEED
for "LOW "
2 4 8 L M
H
speed
BREEZE
ON/SPEED
TIMER
OFF
OSCILLATION
Fig. 10
CONTROL KNOB