Honeywell RAPID EYE MULTI-MEDIA Operator's Manual page 43

Fig. 31. Image size: menu and report, available in a camera window during a Retrieval
session.
Resolution gauge: the resolution at which the recording was made
During a Retrieval session, a resolution gauge reports if a camera window's size is
smaller-than-optimal, optimal or greater-than-optimal for the recorded resolution. The
icon is shown in figures 32 (for NTSC) and 33 (for PAL).
Fig. 32. Resolution gauge for NTSC: indicates resolution setting for video recorded by
that camera.
Fig. 33. Resolution gauge for PAL: indicates resolution setting for video recorded by that
camera.
Set a Multi-Media unit to use either NTSC or PAL cameras; both types cannot be
used on the same unit.
The resolution of the recorded video is shown by the resolution gauge. See tables 12
and 13. The red dot in the upper row of the icon indicates that the resolution applies to
recorded video.
Table 12
Recording: resolution selection for NTSC camera (pixel × pixel)
resolution 160×120
gauge
*
Legacy, used by older Multi units, is included for compatibility. This setting has no icon.
†
Not available on Multi-Media LT units.
legacy* 320×240
n/a
Recorded Video
†
640×240 640×480
†
704×480
3–7