Table of Contents
Advertisement
AT Commands: CDMA/EVDO
Redwing CDMA for Sprint - User Guide, version 2.31
Upon successful entry of this code, all other service provisioning AT commands may be used.
Generally, Sprint will provide the unlock code and type.
If an OTKSL is used to enter provisioning mode, only the +WIMI, +WMDN, and +WCMT
commands will be allowed. All other commands will return ERROR.
Caution: This command supports five attempts to enter the correct service programming
code. If five incorrect attempts are performed, the ME will power down.
Note: Once the correct SPC code is entered, the module transitions to the Service Program-
ming state. This state is not exited until a commit is done (+WCMT). While in the Service
Programming state, subsequent validations of the SPC code are ignored until the Service
Programming state is reset.
+WMDN=num
Set the Mobile Directory Number (MDN). only.
num=phone number
Valid numbers are between 10 and 15 digits in length.
For support of Wireless Number Portability in all non-RUIM software versions, changes to the MDN will
update the IMSI_M portion (least significant 10 digits) of the IMSI. Changes to the MDN will also auto-
matically update the Access Overload Class values unless specifically modified using the +WAOC com-
mand. The new IMSI_M and Access Overload Class values will not be visible in the WIMI and WAOC
commands until after the changes are committed with the WCMT command.
Sprint
will provide the MDN.
+WIMI=num
Set the IMSI (MIN/MSID preceded by the country code, International Mobile Subscriber
Identity). C3111 only.
num=MIN/MSID preceded by the country code
The MIN/MSID preceded by the country code is 15 digits in length; MCC (3), MNC (2),
MIN2 (3), MIN1 (7). For support of Wireless Number Portability, changes to this number will
NOT update the MDN. Changes will automatically update the Access Overload Class values
unless specifically modified using +WAOC command.
Sprint may not support IMSI.
+WSID=[idx],[SID],[NID]
Set SID and NID. C3111 only.
idx=The location in the SID/NID list to store the values.
sid=system ID
nid=network ID
The new SID/NID values are committed to NV with the +WCMT command (AT+WCMT=1).
A maximum of 20 index locations (0-19) are supported. Error 22 is returned if the specified
index value is not in the valid range.
36
Advertisement
Table of Contents
