Table of Contents
Advertisement
APPENDIX B
Redwing CDMA for Sprint - User Guide, version 2.31
AT Commands
Just as with a Hayes compatible analog modem, the Redwing parameters can all be configured
with AT commands.
Direct Serial Connection
Direct Serial Connection
Using HyperTerminal, included with most installations of Microsoft Windows:
Start>All Programs>Accessories>Communications>HyperTerminal
Choose a name for your connection, such as Redwing or AirLink (if you want to have a con-
1.
nection saved for both local and remote, it is recommended the connection name reflect the con-
nection type, i.e. Redwing local). The name and icon are only for your own reference so you can
find the connection at a later date.
HyperTerminal: Connection Name
FIGURE 1.
Select COM1 (or the comport to which the modem is connected) for the Connect Using.
2.
HyperTerminal: Comport Setting
FIGURE 2.
Change the Bits per Second to 115200 (default), Data Bits to 8, Parity to None, Stop Bits to 1,
3.
and Flow Control to Hardware.
If you have configured the Redwing for settings different than the defaults
Note:
for Bits per Second, Data Bits, Parity, and/or Stop Bits, you will need to use your
changed settings.
22
Advertisement
Table of Contents
