Locking/Arming - Valet 3200HF+ Owner's Manual

Locking/Arming

Pressing for one second arms the system by activating the
starter kill and locking the doors (if the door locks are connected).
The horn will honk (if connected) and the parking lights will flash
once to confirm arming of the system. While the system is armed,
the status LED will flash once per second. The optional Failsafe
Starter Kill (if installed) will also prevent the vehicle's starter from
cranking.
The system can also be programmed to arm the optional Failsafe®
Starter Kill automatically (called Passive Mode). If the system has
been programmed for Passive Mode, the Failsafe
automatically activate 30 seconds after the ignition has been
turned off. After the ignition has been turned off, the status LED
will flash rapidly to indicate that the system is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible
to program the system for Passive Locking. With Passive Locking,
the vehicle doors lock automatically at the same time that the
Failsafe ® Starter Kill is activated. If Passive Locking is programmed
on, care must be taken to prevent the keys from being locked in
the vehicle.
NOTE: For Passive Mode to be effective, the Failsafe
must be installed.
8
® Starter Kill will
®
Starter Kill relay
1999 Directed Electronics, Inc.
©
®