Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Valet Valet 3200HF+
- Page 1 Model 3200HF+ Owner's Guide 08/01 and up...
- Page 2 Contact your authorized dealer to obtain the ser- vice charge for your unit. These systems are a deterrent against possible theft. Directed Electronics, Inc. is not offering a guarantee or insuring against the theft of the automobile or its contents and disclaims any liability for the theft of the vehicle and/or its contents.
- Page 3 This product warranty is automatically void if its date code or serial number is defaced, missing, or altered. This warranty will not be valid unless you have com- pleted the warranty card and mailed it to Directed Electronics, Inc. within 10 days after purchase to the address listed on the warranty registration card.
-
Page 4: Table Of Contents
Quick Reference Guide ......... . 21 1999 Directed Electronics, Inc. - Page 5 Standard Configuration 1999 Directed Electronics, Inc. ©...
-
Page 6: What Is Included
12V battery, type GP23A, that will last approx- imately one year with normal use. When the battery begins to weaken, operating range will be reduced and the LED on the remote will dim. 1999 Directed Electronics, Inc. ©... -
Page 7: Your Warranty
Caution This product is designed for fuel injected, automatic transmission vehicles only. Use of this product in a standard transmission vehi- cle is dangerous and contrary to the product's intended use. 1999 Directed Electronics, Inc. ©... -
Page 8: Transmitter Functions
An optional auxiliary func- tion, such as trunk release, can be controlled by pressing 1.5 seconds.) The auxiliary output controls _____________________________. Buttons The remote start function of your system is controlled by pressing simultaneously. 1999 Directed Electronics, Inc. ©... -
Page 9: Using Your System
STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user. Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, 1999 Directed Electronics, Inc. ©... - Page 10 OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED DEI DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DEI WILL NOT BE HELD RESPONSI- BLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. 1999 Directed Electronics, Inc. ©...
-
Page 11: Locking/Arming
Starter Kill is activated. If Passive Locking is programmed on, care must be taken to prevent the keys from being locked in the vehicle. ® NOTE: For Passive Mode to be effective, the Failsafe Starter Kill relay must be installed. 1999 Directed Electronics, Inc. ©... -
Page 12: Unlocking/Disarming
The status LED will stop flashing DRW-35 and the vehicle should start. If it does not start, you may have waited too long; turn the igni- tion off and repeat the process. LOCATION OF VALET ® SWITCH______________________________ 1999 Directed Electronics, Inc. ©... -
Page 13: Valet Mode
Panic Mode at any time, press on the transmitter. NOTE: In order for Panic Mode to be effective, the vehicle’s horn (or optional siren) as well as the vehicle's parking lights must be connected. 1999 Directed Electronics, Inc. ©... -
Page 14: Remote Start
Once the vehicle has started, it will run for the pre-program- med period of time (either 12, 24, or 60 minutes - see Programming Options section of this guide) or until a shut- down input is triggered. 1999 Directed Electronics, Inc. ©... - Page 15 The pre-programmed run time (12, 24, or 60 minutes) has elapsed. Transmitter buttons are pressed again to start the vehicle. To shut down the remote start and turn off the engine: Step on the brake pedal, or Press for one second. 1999 Directed Electronics, Inc. ©...
-
Page 16: Valet Take-Over
This feature helps to ensure that your engine will start in the morning after a night of extremely cold temperatures. IMPORTANT! This feature must only be used in open areas, never in an enclosed area such as a garage. 1999 Directed Electronics, Inc. ©... - Page 17 Within two seconds press and release again. The engine will shut down and the parking lights will flash four times to confirm that Timer Mode has been exited. If the car has already been remote started, skip Step One. 1999 Directed Electronics, Inc. ©...
-
Page 18: Starter Anti-Grind Circuitry
To disable the remote start, move the shutdown toggle switch to the OFF position. The switch can be installed in a location of your choice. Check with your installer for recommended locations. LOCATION OF SHUTDOWN SWITCH_________________________ 1999 Directed Electronics, Inc. ©... -
Page 19: Programming Options
Passive Locking or Active Locking (doors lock only with the transmitter). With Passive Locking, the vehicle doors lock automatically 30 seconds after the ignition has been turned off. Passive Locking can only be selected when the system has been programmed for Passive Mode. 1999 Directed Electronics, Inc. ©... -
Page 20: Glossary Of Terms
Switch: A small push button mounted at a discretionary location inside the vehicle. It is used to override the Failsafe ® Starter Kill when a transmitter is lost or damaged, or to enter or exit Valet ® Mode. 1999 Directed Electronics, Inc. ©... -
Page 21: Convenience Expansions
1.5 seconds can be pro- grammed to operate a factory power release for the vehicle's trunk or hatch. If the factory release is not power-activated, DEI ® 's 522T trunk-release solenoid can often be added. 1999 Directed Electronics, Inc. ©... - Page 22 DEI security system. With Valet ® Car Com ™ , many of the security and convenience features of your DEI security system can be operated from any touch tone telephone. 1999 Directed Electronics, Inc. ©...
- Page 23 Notes 1999 Directed Electronics, Inc. ©...
-
Page 24: Quick Reference Guide
Mode. To activate Panic Mode Press and hold for 1.5 seconds. To disable the remote start system To disable the remote start, move the shutdown toggle switch to the OFF position. Location of Shutdown Switch______________________________ 1999 Directed Electronics, Inc. ©... - Page 25 20 patents in the field of advanced electronic technology, DEI is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world. Call (800) 274-0200 for more information about our products and services.