Mounting A Dm-Xx Module; Figure 1: Exploded View Drawing Of Developer ' S Board With Dm-15/25 - Sony Ericsson Developer’s Board Manual

2.2.1 Mounting a DM-xx Module

This assembly will require (included in kit):
Description
4-40, 3/16" O.D., 5/8" Length Standoffs
4-40 x 5/16" Phillips Panhead Stainless Steel Machine Screw
4-40 x 3/8" Phillips Panhead Stainless Steel Machine Screw
#4 Lock Washer, Inside Tooth, Stainless Steel
Figure 1: Exploded view drawing of developer's board with DM-15/25
Assembly instructions:
Use 3/8" screw with lock washer through the bottom of board to attach each 5/8" long standoff.
Attach module to standoff using 5/16" screw, one for each standoff.
Attach 40-conductor to 30-conductor ribbon cable to JP2 and the module respectively.
Developer's Board Manual Rev A
SEM/CX-02:0061/MAN
Manufacturer, Part #
Keystone, 1839
Various
Various
Various
Page 7 of 28
QTY
4
4
4
4