Motorcraft Part Numbers - Ford 2010 Explorer Sport Trac Owner's Manual

Ford 2010 explorer sport trac automobile owner's manual
Table of Contents

Advertisement

2. Carefully separate the two halves of the air filter housing.
3. Remove the air filter element from the air filter housing.
4. Wipe the air filter housing and cover clean to remove any dirt or
debris and to ensure good sealing.
5. Install a new air filter element. Be careful not to crimp the filter
element edges between the air filter housing and cover. This could cause
filter damage and allow unfiltered air to enter the engine if not properly
seated.
6. Replace the air filter housing cover and secure the clamps.
Note: Failure to use the correct air filter element may result in severe
engine damage. The customer warranty may be void for any damage to
the engine if the correct air filter element is not used.

MOTORCRAFT PART NUMBERS

Component
4.0L V6 engine
Air filter element
FA-1695
Fuel filter
FG-1083
Battery
BXT-65-650
Oil filter
FL-820S
1
Spark plugs
1
For spark plug replacement, see your authorized dealer. Refer to
scheduled maintenance information for the appropriate intervals for
changing the spark plugs.
Replace the spark plugs with ones that meet Ford material and
design specifications for your vehicle, such as Motorcraft or
equivalent replacement parts. The customer warranty may be
void for any damage to the engine if such spark plugs are not
used.
2010 07+ Explorer Sport Trac (esp)
Owners Guide (own2002), 1st Printing
USA (fus)
Maintenance and Specifications
4.6L 3V V8 engine
FA-1780
FG-1083
BXT-65-650
FL-820S
325

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Explorer sport trac 2010

Table of Contents