Table of Contents
Advertisement
A dialog box will open in which you can change the name of the station and adjust the fre-
quency manually.
Click the tool icon under the Favorites list to open the "Edit station" menu.
You can also change the station name and fine tuning at any time on the station management
tab. There's no need to complete the whole job in one sitting.
·
Sorting stations.
The stations are initially listed under Favorites in alphabetical order. As this probably
does not correspond to your usual sorting, you can resort your Favorites with the arrow
buttons on the right-hand edge of the list.
·
Removing stations.
To remove stations from the Favorites, click the X icon below the list.
·
Switch from the "Stations" tab to the "TV" tab. If you have connected the audio output of
the Cinergy hardware to the line input of your sound card, you can adjust the preliminary
settings here. If you have more than one sound card, or if you are not using the line input
as your audio input, then adjust the settings in the "Audio" section under "Mixer" and
"Source".
·
Click "OK" to close the configuration menu.
·
Happy zapping!
Cinergy 400 TV mobile Software (English)
7
Advertisement
Table of Contents
