To Adjust The Cross-Bar (If Equipped) Position; To Remove The Cross-Bar Assembly (If Equipped) From The Roof Rack Side Rails - Ford 2010 Escape Owner's Manual

Driver Controls

To adjust the cross-bar (if equipped) position:

1. Loosen the thumbwheel at both
ends of the cross-bar (both
cross-bars are adjustable).
2. Slide the cross-bar to the desired
location.
3. Tighten the thumbwheel at both
ends of the cross-bar.
To remove the cross-bar assembly (if equipped) from the roof rack
side rails:
1. Loosen the thumbwheel at both
ends of the cross-bar (both
cross-bars are adjustable).
2. Slide the cross-bar to the end of
the rail.
3. Use a long, flat object to depress
the tongue in the endcaps on both
sides of the cross-bar.
4. Slide the cross-bar assembly off
the end of the rail.
89
2010 Escape (204)
Owners Guide, 1st Printing
USA (fus)