Verifying Velocity Solo Installation; Cloning Your Internal Drive To The Velocity Solo - Apricorn Velocity Solo User Manual

Verifying Velocity Solo Installation

1. After the Velocity Solo is installed, replace the chassis cover,
reconnect the power cord(s) and boot the computer.
If the installation is successful, the system confirms detection of the
2.
Velocity Solo drive with on screen messages while the drivers are
automatically installed.
3. If the Velocity Solo drive is not detected, check the drive and cable
connections and ensure that the Velocity Solo is installed correctly in
the PCIe slot.
For Windows XP owners, please visit the Velocity Solo
product page at:
www.Apricorn.com to download Windows XP Drivers.

Cloning your Internal Drive to the Velocity Solo

Once the Velocity Solo installation is complete, restart your system and
download Apricorn's EZ Gig cloning software at the site below:
CLONING SOFTWARE DOWNLOAD
Apricorn EZ Gig Software for Windows®
http://www.apricorn.com/ezgig/
www.apricorn.com
7