Table of Contents
Advertisement
Optional - Connecting an additional drive to
the Velocity Solo SATA III connector
1.
Using a SATA data cable connect an additional drive to the SATA III
port on the Velocity Solo card, as shown in Figure 2.
2.
Using a power cable connect the drive to your computer's power
supply, as shown below.
Figure 2. Connecting the Velocity Solo to a HDD or SSD
6
SATA cable
Power cable
www.apricorn.com
SATA connector
Power connector
Advertisement
Table of Contents
Need help?
Do you have a question about the Velocity Solo and is the answer not in the manual?