Digital - Aphex Compellor 320D Owner's Manual

Dual mono/stereo automatic level controller with analog & digital i/o
Hide thumbs Also See for Compellor 320D:
Table of Contents

Advertisement

The output impedance of 65 ohms is optimized for driving long cables and consequently
a Compellor can drive just about any kind of line, balanced or unbalanced, of any length.
Unique servo balanced output circuitry automatically maintains the proper gain and level into
a balanced or unbalanced output line.
Output connections are made by means of 3-pin male XLR jacks. The pinout follows the
same conventions as the input jacks described above, and you should exercise the same
care about wiring as described for input wiring. Refer to Appendix 1 for complete details
about wiring and interfacing to other equipment.

4.13.2 Digital

The AES/EBU output conforms to the 110 ohm standard using a 3-pin XLR male jack. It is
capable of driving any standard digital audio cable run. Be sure to use only digital audio rated
cabling for best results.
4.14 Summary
If you pay attention to the line voltage setting, reference level, and i/o wiring you should have
no trouble operating the Compellor. If any difficulties are experienced while installing the
Compellor, other information contained in this manual will probably supply adequate assis-
tance. Please study this manual before contacting the factory for assistance.
Page 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents