using the MDI-II jack (described below).
Uplink Jack(s) (MDI-II): Use this jack to connect
stations to the hub. This is MDI-II (Medium-
dependent Interface, straight-wired) jack, which
means you can connect the hub to a device with a
MDI-X port using an ordinary straight-through
cable.
LED Indicators
AOH-605 5-port SOHO 10/100Mbps Fast Ethernet Hub
AOH-608 8-port SOHO 10/100Mbps Fast Ethernet Hub
Power Indicator (PWR)
When this indicator lights green, the hub is receiving
power, otherwise. it is off.
Expansion switch port full duplex status (EXP-
FDX)
7