American DJ Galaxian 3D User Instructions page 7

Galaxian 3D
BLND -
Blackout or Stand by mode.
1. Tap the MENU button until "BLND" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until "Yes"
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select "No" and
press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at
all times, or "OFF" to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER and then hold MENU for at least 2-3 seconds
to confim.
DISP
- This function will reverse the display 180º.
1. Tap the MENU button until "DISP" is displayed, press ENTER.
2. Press ENTER to "flip" the display. Press ENTER to "flip" it
again. Press ENTER when you have made your desired setup.
TEST
- This function is a self-test program.
1. Tap the MENU button until "TEST" is displayed, press ENTER.
The unit will now run a self-test program
FHRS
- With this function you can display the running time
American DJ - www.americandj.com - Galaxian 3D Instruction Manual Page 13
© ®
System Menu Galaxian 3D
of the fixture.
1. Tap the MENU button until "FHRS" is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
ware of the unit.
1. Tap the MENU button until "VER" is displayed, press ENTER.
2. The display will now display the version of software. Press
MENU to exit.
©
- With this function you can display the version soft-
American DJ - www.americandj.com - Galaxian 3D Instruction Manual Page 14
®
System Menu