American DJ Galaxian 3D User Instructions page 6

Galaxian 3D
American DJ - www.americandj.com - Galaxian 3D Instruction Manual Page 11
© ®
System Menu Chart Galaxian 3D
System Menu: When confirming your setting press ENTER
and then hold MENU for at least 2-3 seconds, or you can
wait 1 minute for automatic setup. To exit without making
any adjustments press the MENU button.
ADDR -
DMX Address Setting.
1. Tap the either the MENU, UP, or DOWN buttons until "ADDR"
is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until "SLND" is displayed, press
ENTER. Either "SL 1" or "SL 2" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER and then hold MENU for at least 2-3
seconds to confim.
NoTE: In a Master/Slave configuration you can make one
fixture the Master and then set the next fixture to "SL 2", the
fixtures will now have contrast movement to each other.
SOUN -
Sound Active mode.
1. Tap the MENU button until "SOUN" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to activate sound active mode, or
"OFF" to deactivate sound active mode.
3. Press ENTER and then hold MENU for at least 2-3 seconds
to confim.
American DJ - www.americandj.com - Galaxian 3D Instruction Manual Page 12
© ®
System Menu