Shelf Installation - Sandusky Lee KDE7236 Assembly Instruction Manual

Step 5

Shelf Installation

-
A)
At the desired shelf height, insert 4 Shelf
Clips (S) into the slots located inside
the front edges of the Side and Back Panels.
See Fig. 1.
B)
Angle a Shelf (G) into the cabinet above
the installed Clips with its rear tilted down.
C)
Set the rear of the Shelf (I) onto the Shelf Clips (S)
placed in the Back Panels. See Fig. 2.
D)
Tilt the Shelf (I) down until it rests on the
front Shelf Clips (S). If the Shelf is uneven,
reposition the Shelf Clips into appropriate
locations to level it.
E)
Repeat this process for the remainder of
the shelves.
Insert 4 Shelf
Clips (S) at
equal heights
Snap-It Storage Cabinets
Assembly Instructions
Fig. 1 - Shelf clip installation
Angle the
back of
the shelf
downward
and rest it
on the rear
shelf clips
Slots in
front and
back of
cabinet
Tilt the front
of the shelf
downward
to rest it on
the front
shelf clips
G -
Shelf
Fig. 2 - Shelf installation
S -
Shelf Clip
Insert clips
into slots
G -
G -
G -
G -
Page 5
Shelves rest on top
of clips
Shelf
Repeat the
Shelf
process for the
other
shelves
Shelf
Shelf