Plh-Vs8 Video Switch - AMX Encore Instruction Manual

Phast encore package is a compact and powerful control system
Table of Contents

Advertisement

Figure 5
PLB-AS16 Audio Switch
(rear view)
Figure 6

PLH-VS8 Video Switch

Encore Quick Setup Guide
Either 8 (PLB-AS8) or 16 (PLB-AS16) full audio zones are supported. Each output is
an audio zone, and each zone can select any input, even if that input is already
selected by another audio zone. Landmark Designer software now allows you to
automatically software-connect any audio source to inputs on ALL of the Audio
Switches in a system. This allows multiple Audio Switches to share the same
sources, increasing the number of audio zones in a system that use those sources.
Landmark software does not limit the number of Audio Switches in a system.
PHAST audio switches can be rack or shelf mounted. Matrices of up to 16 X 32 are
allowed.
PLH-VS8 Video Switch
The PLH-VS8 Video Switch (Figure 6) is the perfect partner to PHAST Audio
Switches. Each PLH-VS8 routes 8 video inputs to 8 video ouputs. It can distribute
any input to any combination of outputs, with full signal level for all destinations.
It also senses the presence of a video signal at each input, allowing a video signal to
act as a trigger event for system programming events. Encore supports up to two
PLH-VS8 Video Switches, allowing a 16x16 video matrix.
Introductions
5

Advertisement

Table of Contents
loading

Table of Contents