Advertisement
Punch LED PRO
DMX Values and Functions - 7 Channel
Channel
Value
1
0 - 255
2
0 - 255
3
0 - 255
4
0 - 7
8 - 255
5
0 - 15
16 - 255
6
0 - 31
32 - 63
64 - 95
96 - 127
128 - 159
160 - 191
192 - 223
224 - 255
7
0 - 255
• Channels 1, 2, and 3 will only work with Channel 5, when Channel 6
is not being used. Channels 4 & 5 work together.
• Channels 1, 2, and 3 will not work, when Channel 4 is being used.
When units are daisy chained together in DMX Mode, channels 1, 2,
and 3 must be "OFF" for units to sync together when using Channel
4. Channels 4 & 5 work together.
• When the values of Channel 6 are between 32 and 127, you must
be using Channels 1, 2, 3, or all three combined. Channels 4 & 5 will
not work
• When the values Channel 6 are between 128 and 223, Channel 5
will control the speed of the color mixing and changing.
• When the values of Channel 6 are between 224 and 255 (Sound
Active), Channel 5 will control sound sensitivity.
American DJ Supply
- www.americandj.com - Punch LED PRO Instruction Manual Page 11
©
®
Function
RED
0%
100%
GREEN
0%
100%
BLUE
0%
100%
NOTHING
COLOR MACRO
NOTHING
STROBING/MACRO SPEED
NOTHING
DIM
BRIGHT
BRIGHT
DIM
DIM
BRIGHT
DIM
COLOR MIXING
3 COLOR CHANGE
7 COLOR CHANGE
SOUND ACTIVE
DIMMER
0%
100%
Punch LED PRO
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use a soft cloth to wipe down the outside casing.
2. Clean the external optics with a soft cloth every 20 days.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Punch LED PRO
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact American DJ® for service.
1-800-322-6337
American DJ Supply
- www.americandj.com - Punch LED PRO Instruction Manual Page 12
©
®
Cleaning
Trouble Shooting
Advertisement
