American DJ Revo 4 User Instructions page 5

Revo 4
System Menu: When confirming your setting press ENTER and
then hold MENU for at least 2-3 seconds, or you can wait 1
minute for automatic setup. To exit without making any adjust-
ments press the MENU button.
ADDR -
DMX Address Setting.
1. Tap the either the MENU, UP, or DOWN buttons until "ADDR" is
displayed, press ENTER.
2. "1" will now be displayed and flashing. Press the UP or DOWN but-
tons to find your desired address. Press ENTER to set your desired
DMX address.
NOTE: If after you connect your DMX controller the unit does not
fall into DMX mode, press and hold the MENU button for at least 3
seconds.
CHND -
This will let you switch between 4 Channel DMX
mode and 256 Channel DMX mode.
1. Tap the either the MENU button until "CHND" is displayed, press
ENTER. Either "4CH" or "256C" will be displayed
2. Tap the UP or DOWN buttons to choose your desired DMX mode
and press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the either the MENU button until "SLND" is displayed, press
ENTER. "MAST", "SL 1" or "SL 2" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to confim and exit.
SHND: SH 1 - SH 12
- Show modes 0 - 12
Show Mode can run with or without sound active mode
on. With sound active mode on, the shows will tend to run
American DJ - www.americandj.com - Revo 4 Instruction Manual Page 9
®
System Menu Revo 4
faster.
1. Tap the MENU button until "SHND" is displayed, press ENTER.
2. "SH X" will now be displayed, "X" representing a number between
1-12. Programs 1-12 are preset shows, while "SH 0" is random mode.
Press the UP or DOWN buttons to find your desired show and press
ENTER to confirm.
3. Press ENTER to confirm, and then press and hold the MENU button
for at least 3 seconds.
SOUN
mode
1. Tap the MENU button until "SOUN" is displayed, press ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. When you have made your selection, press the ENTER, and then
press and hold the MENU button for at least 3 seconds to confirm.
BLND -
1. Tap the either the MENU button until "BLND" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select No and press
Enter.
LED -
2 minutes.
1. Tap the either the MENU button until "LED" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN
buttons to select "ON" to keep the LED display on at all times, or
- In this mode you can run the unit in sound active
Blackout or Stand by mode.
With this function the LED display will turn off after
American DJ - www.americandj.com - Revo 4 Instruction Manual Page 10
®
System Menu