American DJ Quad Phase HP User Instructions page 7

Quad Phase HP
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. The first unit in the chain (master) will use
the female XLR connector only - The last unit in the chain will use
the male XLR connector only. For longer cable runs we suggest a
terminator at the last fixture.
2. On the Master unit find your desired show and set that show by
pressiing the ENTER button.
3. On the slave units
tap the MENU button until "SLND" is dis-
played, select your desired slave mode and Press ENTER.
4. The slave units will now follow the Master unit.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Quad Phase HP
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 5 fixtures maximum. After 5 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Quad Phase HP
Blackout Blackout the unit
1. Synchronous strobe.
Function 2. Two light strobe.
3. Sound control.
Mode Strobe(LED OFF)
ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 13
Operation
Power Cord Daisy Chain
UC3 Control
Rotation speed (1-8).
Chase(LED ON)
Quad Phase HP
Channel Value
1 0 - 255
1 - 16
17 - 33
34 - 50
51 - 67
68 - 84
85 - 101
102 - 118
119 - 135
136 - 152
153 - 169
170 - 186
187 - 203
204 - 220
221 - 237
238 - 255
2
0 - 9
10 - 120
121 - 134
135 - 245
246 - 249
250 - 255
3
0
1 - 255
4
0 - 15
16 - 255
ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 14
DMX Traits
Function
COLOR SELECTION
COLOR 1
COLOR 2
COLOR 3
COLOR 4
COLOR 5
COLOR 6
COLOR 7
COLOR 8
COLOR 9
COLOR 10
COLOR 11
COLOR 12
COLOR 13
COLOR 14
COLOR 15
ROTATION
NO ROTATION
CLOCKWISE FAST - SLOW
NO ROTATION
COUNTER-CLOCKWISE
SLOW - FAST
NO ROTATION
SOUND ACTIVE
STROBING
OFF
STROBING SLOW - FAST
SHUTTER OPEN
OFF
OPEN