Getting Started; Installation; Ii Getting Started 1. Installation; Setup - American DJ myDMX 2.0 User Instructions

myDMX 2.0 II Getting Started
II Getting Started

1. Installation

Insert the software installation CD into the CD drive of your computer, or download the software from
our website. Double click the setup icon to install the software. Follow the installer instructions.
The USB interface drivers will be installed during the software installation. When installing on Windows,
you may receive a warning message saying that the drivers have not been digitally signed. Press
'Continue Anyway'.
Once the installation is complete, connect the USB interface. Windows systems will run a second
device driver installation. Once you see a message bubble on the taskbar to say that the driver has
been installed successfully, you are ready to start the myDMX 2.0 software.

2. Setup

To begin with, the software needs to be told which lighting fixtures are being used. Select your lighting
fixture from the list of manufacturers on the left. If you are looking to add an RGB, RGBD, RGBW, RGBY
or Single channel fixture, select the _GENERIC folder at the top. If you do not see your lighting fixture
in the list, you will need to make it yourself using the Scan Library editor (PC only), or contact us and we
will build the profile for you.
To add your lighting fixture, drag and drop it onto the DMX patch table, or select the number of fixtures
and starting channel in the bottom left and select patch. Fixtures can be moved within the DMX patch
by dragging and dropping.
If you are looking to add a matrix of lighting fixtures such as an RGB wall or dancefloor, patch the total
number of lighting fixtures here and refer to the 'Arranging Fixtures' topic for more information.
Page 6