Justification - Brady BMP 71 User Manual

Justification

Justification refers to the alignment of data between boundaries on a label or in an area. There
are two types of justification: horizontal and vertical. Horizontal justification (H. Justify)
aligns data between the left and right boundaries of a label or area, while Vertical justification
(V. Justify) aligns data between the top and bottom boundaries of a label or area. Justification
is applied to an area or a label. It cannot be applied line-by-line.
To apply justification:
Navigate to the label or area where justification is to be applied.
1.
To apply justification to a label, press Label
2.
OR
To apply justification to an area, press Area
Choose H. Justify or V. Justify.
3.
Choose the horizontal or vertical justification desired.
4.
Press OK
5.
Every line of data on the label or in an area is justified according to the option selected. When
adding a new label, the justification maintains the current justification settings, but you can
change it again. Different justification can be applied to individual labels in a multi-label file
or different areas on one label.
or Enter .
Labels and Areas
Justification
.
.
BMP71 User's Manual
59