Troubleshooting; Suggested Settings - Electro-Harmonix Ring Thing Manual

Using an External Oscillator -
shift, turn the WAVE knob to full counter-clockwise and plug the external oscillator
into the MOD input. The FINE/DEPTH knob controls the depth of the external
modulation. Note: turning FILTER/RATE to full counter-clockwise will disable external
modulation.
Using an Expression Pedal –
control the Pitch Shift amount. The expression pedal's pitch shift range is set by the
COARSE knob. The toe down position will be the current setting of the COARSE knob,
the toe up position is no pitch shift, though you will still hear the pitch shift's
modulation.
Troubleshooting –
Check to make sure that the BLEND knob is 50% or higher. If the modulation is
making it hard for you to hear what is going on, turn modulation off by turning the
FILTER/RATE knob down to full counter-clockwise and then set FINE to 12 o'clock.

SUGGESTED SETTINGS

the Ring Thing.
DETUNE
RING MOD
RING VIBE
To use an external oscillator to modulate pitch
Plug an expression pedal into the EXP ¼" Jack to
Not hearing the Pitch Shift or just something unexpected?
–
Below are some suggested settings for getting started with
5