Advertisement

Specifications
Functional
Paper Weight . . . . . . .16# to 28# Bond Stock (60g-105g)
Form Width . . . . . . . . . . . . . . . . . . .3.5" min. to 8.5" max.
Form Length . . . . . . . . . . . . . . . . . . . .5" min. to 14" max.
Feed Table Capacity . . . . . . . . . . . . . .150 Sheets of 20#
Speed . . . . . . . . . . . . . .9000 sheets per hour (8.5" X 11")
Fold Styles . . . . . . . . . . . .Letter, Half, Z, Double Parallel,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .and Brochure
Stapled Documents . . . . .Four 24# sheets max, hand fed
Physical
Dimensions . . . . . . . .20.6"Wide X 14.2"Deep X 17.2"High
Machine Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .38 lbs.
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .43 lbs.
Electrical
Power . . .115 V.A.C., 1.3 Amp, Thermal Overload Protected
Introduction
Thank you for selecting the Martin Yale Model 1601 Autofolder. We recommend that you familiar-
ize yourself with the Model 1601 Autofolder by carefully reading these instructions. Thorough
understanding of the information contained within this instruction manual will help to eliminate most
operator-associated errors and ensure years of trouble-free performance.
WARNING! Never connect power to the machine until you are ready to set up and operate
the folder. During set up, operation, and maintenance keep hands, hair, loose clothing, and
jewelry away from all moving parts. Serious bodily injury could result. Service or disas-
sembly of the folder should only be attempted with the power disconnected and locked out.
R
MODEL 1601
AUTOFOLDER
Serial No.

Table of Contents

1.0 Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . Page 2
2.0 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
2.1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
2.2 Feed Table . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
2.3 Paper Guide Adjustment. . . . . . . . . . . . . . . . Page 3
2.4 Setting Fold Styles . . . . . . . . . . . . . . . . . . . . Page 3
2.5 Exit Ramp Set-up. . . . . . . . . . . . . . . . . . . . . Page 4
2.6 Stacking Wheel Set-up . . . . . . . . . . . . . . . . . Page 4
3.0 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
3.1 Automatic Feed Operation . . . . . . . . . . . . . . Page 5
3.3 Folding Stapled Multiple Sets . . . . . . . . . . . . . . . Page 5
4.0 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . Page 6
4.2 Clearing Paper Jams . . . . . . . . . . . . . . . . . . Page 7
4.3 Feed Wheel Cleaning. . . . . . . . . . . . . . . . . . Page 7
4.4 Bushings and Folding Rollers . . . . . . . . . . . . Page 7
5.0 Troubleshooting Guide . . . . . . . . . . . . . . . . Page 8
5.1 Machine will not run . . . . . . . . . . . . . . . . . . . Page 8
5.2 Paper will not feed . . . . . . . . . . . . . . . . . . . . Page 8
5.3 Crooked folds. . . . . . . . . . . . . . . . . . . . . . . . Page 8
5.4 Ink smudges on paper . . . . . . . . . . . . . . . . . Page 8
5.5 Wrinkled paper. . . . . . . . . . . . . . . . . . . . . . . Page 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1601 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Martin Yale 1601

  • Page 1 Serial No. Introduction Thank you for selecting the Martin Yale Model 1601 Autofolder. We recommend that you familiar- ize yourself with the Model 1601 Autofolder by carefully reading these instructions. Thorough understanding of the information contained within this instruction manual will help to eliminate most operator-associated errors and ensure years of trouble-free performance.
  • Page 2: Model

    1601. Inspect the Model 1601 and all accessories for shipping damage. If any damage is found, contact the carrier immediately. Note: Always pick up the Model 1601 by its sides, never attempt to lift it by grasp- ing the roller cover or tables.
  • Page 3: Paper Guide Adjustment

    Fig. 5 Fig. 6 Align tabs on the paper sup- port with the slots in the Lower the feed table paper support into position 2.3 Paper Guide Adjustment Note: the folder is factory adjusted for standard 8.5" paper. The paper guides feature a dual-purpose adjustment; paper width and skew. These are accomplished with thumbscrews (Fig.
  • Page 4: Exit Ramp Set-Up

    Size of paper - The fold rulers on the Model 1601 are arranged with 3 separate columns for 3 common paper sizes. In addition, the icons in each column are color coded for clarity. NOTE: LTR=8 1/2 X 11” (Green), LGL=8 1/2 X 14”...
  • Page 5: Operation

    Retest with a few sheets and adjust as necessary to square up the fold. 3.2 Manual Feed Operation of Multiple Sets The Model 1601 is capable of folding single sheets or Push spring loaded lever away from opera-...
  • Page 6: Maintenance

    edge first (Fig. 15). Avoid using loose fitting staples or inserting Always feed the stapled set in them too close to the edge (less than 5/16", 8mm). with the stapled edge first and 4.0 Maintenance parallel to the fold rollers 4.1 Fold Roller Removal and Cleaning During normal operation, the fold rollers will become contami- nated with paper dust, ink, copy toner and other performance-...
  • Page 7: Clearing Paper Jams

    If needed, apply a single drop of light machine oil to the inside of the roller shafts next to the bearing block. Avoid over-oiling as it will seep onto the roller surface and transfer to your paper. Reassemble the folder by reversing steps 1 through 8. Care must be taken when re-installing the right side cover.
  • Page 8: Crooked Folds

    Stacking it and placing a large heavy object such as a large book on it for a couple hours can straighten paper. Another option is to place the paper on the Model 1601 feed table with the curl down. 5.3 Crooked...

Table of Contents

Save PDF