Download Print this page

Electrical Connections; Hardware Installation - Obvius, LLC A7810 Installation And Operation Manual

Acquilite emb - data acquisition server

Hide thumbs Also See for A7810:

Table of Contents

Electrical Connections

Step 1 - Unpack materials: Remove all materials from shipping box and verify all required components are available

Step 2 - Mount the AcquiLite on the wall, panel or other appropriate location.

Step 3 – Attach pulse output devices to the pulse inputs on the A7810. For dry-contact

WARNING: After wiring the A7810, remove all scraps of wire or foil shield from the electrical panel. This

could be dangerous if wire scraps come into contact with high voltage wires.

Step 4 - Power-up and diagnostics: A power supply is not provided with the AcquiLite EMB, therefore it is up to the

installer to provide the required 24VDC. After power is applied, the green "Alive" light in the upper right of the AcquiLite

should come on and the LCD display will display a series of diagnostic screens ending with the following message on the

LCD display (this boot sequence may require up to 20 seconds to complete):

Page 6

AcquiLite Ready

192.168.40.50

A7810 AcquiLite – Data Acquisition Server

Table of Contents