Table of Contents
Advertisement
Hardware Overview
A7810 Features and Specifications
Processor
Arm9 embedded CPU
Operating System
Linux 2.6
Memory 32 MB ram, 16 MB flash
LED
Ethernet, Pulse (x4), power, alarm
Console 2 x 16 character LCD, two pushbuttons
LAN
RJ45 10/100 Ethernet, full half duplex, auto polarity
Protocols
Modbus/TCP, TCP/IP, PPP, HTTP/HTML, FTP, NTP, XML, SNMP-Trap
Power Supply
1
24VDC, 500mA, Required (not included) The unit is to be sourced by a Class 2 power supply with
the following output: 24Vdc, 500 mA minimum but not to exceed 8A.
Note: only 350mA is required if the USB port is not used.
Interval Recording
User selectable 1-60 minutes. Default 15 minute interval
Inputs
2
4 pulse inputs, dry contact.
Monitor consumption, rate
Pulse rate/width user selectable to 10hz, 50hz or 100hz.
Pulse rate option: 10hz, minimum pulse width 50ms
Pulse rate option: 50hz, minimum pulse width 10ms
Pulse rate option: 100hz, minimum pulse width 5ms
Contact closure threshold 100
Pulse count values are stored in non-volatile memory.
Isolation
2
:
The RJ45 Ethernet is isolated to 1500VDC from the main board.
Power input, Pulse inputs, and USB port and are non-isolated.
Environmental
Pollution Degree 2, Altitude up to 2000M.
For indoor and outdoor use when used in an appropriate enclosure.
The A7810 must be mounted inside a NEMA rated electrical enclosure for safety and isolation
requirements.
North America: Indoor, temperature -30º - +70ºc, 0 - 95% humidity, non-condensing.
Safety
UL61010 Recognized, File: E320540 (Model A7810)
EMC
FCC CFR 47 Part 15, Class A
EN 61000, EN 61326
Size
4" x 4.25" x 2" (102mm x 108mm x 51mm)
Mass
0.42 lbs (0.19 kg)
1
inputs are intended for low voltage
class 2 outputs.
2
if the product is used in a manner not
specified by the manufacture, the
protection provided by the equipment
may be impaired.
Page 5
to 2.5k user selectable
A7810 AcquiLite – Data Acquisition Server
4
Advertisement
Table of Contents
Troubleshooting
