Titling Discs; Erasing Disc Title - Alpine CDA-9847R Owner's Manual

Titling Discs

It is possible to title your favourite CD's.
You cannot input titles on radio station or MP3/WMA discs.
1
Press TITLE and select the Title Display.
For details, see "Displaying the Title/Text" (page 17).
2
Press and hold TITLE for at least 2 seconds. The
first character will blink.
3
Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
4
Press Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
5
Repeat steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 6 to complete the title.
6
Press TITLE to record the title.
• If you cancel while entering a title, selected characters are not
written.
• You can enter 18 CD titles on this unit. If you try to store beyond
the limit, the display will show "FULL DATA." At this point, no
more titles can be stored. To input a new title, one of the previously
inputted titles must first be deleted.
• The CD Changer title length or memory capacity varies depending
upon the model being used.
• When you want to erase a title, enter the "
spaces.
• The operations described in steps 3 to 5 must be made within 10
seconds. The input mode will be cancelled if no action is taken for
over 10 seconds.
18
-EN

Erasing Disc Title

1
2
3
4
5
• You cannot erase CD-TEXT.
• "NO DATA" is displayed for 2 seconds if the title is not input in
step 2, or if the title is erased in step 4.
" symbol into all
Press TITLE to select the Title Display. Then, press
again and hold for at least 2 seconds.
Press and hold -/J for at least 2 seconds.
The title in the display will blink.
Press g or f repeatedly until the title you
want to erase is displayed.
Press and hold -/J for at least 2 seconds to erase
the title displayed.
Press TITLE to cancel the title erasing mode.