Advertisement
AV Component Hookup
If you have an HDMI-compatible TV and players, you can connect them
to the AV receiver with HDMI cables. The audio and video signals received
via the HDMI inputs are output by the HDMI OUT as they are (pass-through).
To listen through the speakers connected to the AV receiver, please make
the audio connections shown below.
L
Cable/
R
OPTICAL
HDMI
OUT
satellite
DIGITAL
AUDIO
OUT
OUT
HDMI
IN
To fully enjoy the AV receiver's
listening modes, turn off the
volume on your TV.
L
DVD/BD
R
COAXIAL
HDMI
player
OUT
DIGITAL
AUDIO
OUT
OUT
Coaxial feed from TV antenna
If you are not using Cable/satellite box,
please refer to the instruction manual.
Antenna input
(e.g., RF IN)
IF NO HDMI
DIGITAL
AUDIO
VIDEO
OUT
OUT
COAXIAL
L
R
TV
OPTICAL
DIGITAL
OUT
Assigning the Digital Input
If there's no sound, you'll need to assign the
digital inputs as necessary using the setup
menus on the AV receiver's display.
If you connect your DVD/BD player to the AV
receiver's COAXIAL DIGITAL IN, and your
cable/satellite receiver to the OPTICAL 1
DIGITAL IN, as shown, it's not necessary to
assign the digital input.
See the other side of this sheet for the Speaker hookup.
If your TV or player doesn't support HDMI, use the analog or digital
connections shown below.
DVD/BD
OUT
player
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
L
Cable/
R
satellite
VIDEO
AUDIO
Antenna input
OUT
OUT
(e.g..RF IN)
On the front panel
TV
VIDEO 1
IN
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.
Advertisement
