Table of Contents
Advertisement
AgfaPhoto DuoScan 100
5. Press the OK button to convert the picture to a digital image. To get the
best digital image, wait for the image display on the LCD screen to adjust
the brightness until it becomes stable. This normally take 3~4 seconds,
depending on the brightness of your film.
Note: To save power, the scanner will automatically turn to the sleep
condition if you do not use it for more than 3 minutes. You can reactivate the
scanner by pressing any one of the buttons. If the scanner is not used after
more than 6 minutes it will turn off automatically.
19
Advertisement
Table of Contents
