Gprs Data Counter; Viewing The General Log - Nokia 7650 User Manual

Setting a call cost limit for yourself
→
1
Select Options Settings
2
The phone requests you to enter the limit in units. For this you may need the PIN2 code.
Depending on the Show costs in
currency.
When the charging limit you have set yourself is reached, the counter stops at its maximum
value and the note Reset all calls' cost counter
→ →
Options Settings Call cost limit
Erasing call cost counters - Select
code, see p. 37. To clear an individual event, scroll to it and press

GPRS data counter

Allows you to check the amount of data sent and received during packet data (GPRS)
connections. For example, you may be charged for your GPRS connections by the amount
of data sent and received.

Viewing the general log

In the general log, for each communication event, you can see the sender or recipient
name, phone number, name of the service provider, or access point. See Fig. 5, p. 24.
Note: Sub-events, such as a short message sent in more than one part and packet
data connections, are logged as one communication event.
Filtering the log
→ Filter. A list of filters opens.
1
Select Options
2
Scroll to a filter and press Select.
→ → On.
Call cost limit
setting, enter either the amount of charging units or
is displayed. To be able to make calls, go to
→ Off. For this you need the PIN2 code, see p. 37.
→
Options Clear counters. For this you need the PIN2
Copyright © 2004 Nokia. All rights reserved.
.
Go to
counter.
Go to
and move the joystick to
the right.
Icons:
for outgoing, and
for missed
communication events.
→
Log GPRS
→
Menu Log
for incoming,
23