Voice Commands - Nokia N73 User Manual

a roaming agreement with your home network, that is,
the operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhancement
In the standby mode,
is connected, and
Bluetooth connection to a headset is lost.
compatible loopset is connected and
compatible Text phone
Select Headset, Loopset,
handsfree, or Car kit
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
108
On to set the device to indicate
indicates a compatible headset
that the headset is unavailable, or a
that a
is connected.
Text phone, Bluetooth
and from the following:
"Profiles—set tones", p. 95.
Copyright © 2006 Nokia. All rights reserved.
ringing type is set to
answer is disabled. Automatic answer is not available for
Text phone.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
If you are using a
device. Press
Enhancement
You can use voice commands to control your device.
For more information about the enhanced voice
commands supported by your device, see
indicates a
p. 68.
To activate enhanced voice commands for starting
applications and profiles, you must open the
application and its
Tools > Voice cm.
for the applications and profiles. To use enhanced voice
commands, press and hold
say a voice command. The voice command is the name of
the application or profile displayed in the list.
Beep once or Silent, automatic
Text phone, you must activate it on your
, and select Tools > Settings
> Text phone > Use text phone

Voice commands

Profiles folder. Press
> Profiles; the device creates voice tags
in the standby mode, and
>
> Yes.
"Voice dialing",
Voice comm.
, and select