Usb Data Cable; Call - Nokia 8600 User Manual

Data transfer with a
compatible device
For synchronization, Bluetooth wireless
technology or a cable connection is used.
The other device is in the standby mode.
To start data transfer, select
Settings > Connectivity
the transfer contact from the list, other than
Server synchronisation
synchronisation. According to the settings,
the selected data is copied or synchronised.
The other device also must be activated for
receiving data.
Synchronise from a compatible PC
Before you synchronise data from calendar,
notes, and contacts from a compatible PC,
you must install the Nokia PC Suite software
of your phone on the PC. Use Bluetooth
wireless technology or a USB data cable for
the synchronization, and start the
synchronization from the PC.
Synchronise from a server
To use a remote internet server, you must
subscribe to a synchronization service. For
more information and the settings required
for this service, contact your service
provider. You may receive the settings as a
configuration message. See
settings service", p.
p. 41.
If you have saved data on the remote
internet server, to synchronise your phone,
start the synchronization from your phone.
Select Menu > Settings
Data transfer > Server
Menu >
> Data transfer
or PC
"Configuration
x and "Configuration",
> Connectivity
synchronisation.
Copyright © 2007 Nokia. All rights reserved.
Depending on the settings, select
synchronisation
Synchronizing for the first time or after an
interrupted synchronization may take up to
30 minutes to complete, if the contacts or
calendar are full.
and

USB data cable

You can use the CA-101 USB data cable to
transfer data between the phone and a
compatible PC with Nokia PC Suite.
To activate the phone for data transfer,
connect the data cable to the phone and PC.
See "Charge the battery with the CA-101
data cable", p.
connecting the data cable. The phone
detects the data cable automatically.

■ Call

Select Menu
following options:
Call divert—to divert your incoming calls
(network service). You may not be able to
divert your calls if some call barring
functions are active. See
in "Security", p. 41.
Anykey answer
incoming call by briefly pressing any key,
except the power key, the camera key, the
left and right selection keys, or the end key.
Slide call handling
calls—to answer an incoming call by opening
the slide
>
Automatic redial
of 10 attempts to connect the call after an
unsuccessful call attempt
or Initialising copy.
3 for more information on
> Settings > Call and from the
Call barring service
> On—to answer an
> Open slide to answer
> On—to make a maximum
Initialising
39