Launching An Application - Nokia 3230 User Manual

If you install an application that
contains an update or repair to an
existing application, you can only
restore the original application if
you have the original application or
a full backup copy of the removed
application. To restore the original
application, first remove the
updated or repaired application and
then re-install it from the original
application or the backup copy.
During installation, the phone
checks the integrity of the
application to be installed. The
phone shows information about the
checks being carried out and you are
given options whether to continue
or cancel the installation. Once the
phone has checked the integrity of
the application, it is installed on
your phone.
Installing a Java™application
The .JAR file is required for
installation. If it is missing, the
phone may ask you to download it. If
there is no access point defined for
the Application manager, you are
asked to select one. When
downloading the .JAR file, you may
need to enter a user name and
password to access the server. You
obtain these from the supplier or
manufacturer of the application.
Copyright © 2005 Nokia. All rights reserved.
• To start a data connection and to
view extra information about the
application, scroll to it and select
→
Options Go to web
• To start a data connection and to
check if there is an update
available for the application,
scroll to it and select
Update.
Java settings
• To change the default access
point that a Java application uses
for downloading extra data,
select Options
Access point. See "Access points"
on page 82.
• To change the security settings
that determine the actions that a
Java application is permitted to
perform, select
Settings.
Not all Java applications permit you
to change the security settings.

Launching an application

→
1. Select Menu
→
Applications
application:.
2. Scroll to an application or an
application set (the name
depends on the application).
T o o l s
address.
→
Options
→ →
Settings
→
Options
→
Web
Select
71