Table of Contents
Advertisement
External Control Commands
Search (SE)
Command:
Jumps to the specified position within the current MPEG file or
playlist.
Format:
<address>SE<CR>
Response:
R<CR>
Explanation:
The Search command can jump to any I-frame within the current
file or the head of any other file within the playlist. After executing
the search command the video will transition to Still mode until
another command is received. In the event that a search command
is received with an out of range address value (i.e. – chapter
number higher than the number of files in the playlist) the search
command will not be processed and the error code "E12" will be
returned.
Examples:
0@CH15SE
th
Jumps to the head of the 15
file in the playlist and then transitions
to still mode. If there are fewer than 15 files in the playlist an error
code E12 is returned and no change is made.
149
Advertisement
Table of Contents
