Networking Commands - Focus 3.2 User Manual

External Control Commands

Networking Commands

FireflySetDefault
This command sets the networking back to it's factory state:
IP Address - 10.0.1.1
Gateway - 255.255.255.0
Netmask -
Network Type - Static (2)
Web Enable - On (0)
Web User Name - firefly
Web Password - 123456
Syntax
fireflysetdefault
Parameters
None
Remarks
This command is useful for situations where you simply would like
to "clean house" and start over. If you've forgotten an IP address,
password, etc., you mightfind the following network commands
more useful.
FireflySetIpAddr
The FireflySetIpAddr command will allow you to change the
players IP Address.
Syntax
IP Address
fireflysetipaddr
Parameters
IP Address
32 bit address used to identify a player on any Network.
134