Mitsubishi Electric DLP WD8200U User Manual page 15
Controlling the projector using a personal computer
Hide thumbs
Also See for DLP WD8200U:
- User manual (78 pages) ,
- Brochure & specs (2 pages) ,
- Overview (4 pages)
Table of Contents
Advertisement
[Example 3] When checking the TINT setting (when the TINT is set to +10). (Values enclosed in quotation marks
are ASCII codes.):
• When ID is not specified:
Command sent from the PC, etc.
'30' '30' '53' '0D'
00S
• When ID is specified (when the command is sent to the projector with the ID of "01" or "ALL"):
Command sent from the PC, etc.
'30' '30' '3B' '30' '31' '3B' '53' '0D'
00;01;S
[Example 4] When setting the GAMMA MODE of the COLOR ENHANCER-USER to DETAIL. (Values enclosed in
quotation marks are ASCII codes.):
• When ID is not specified:
Command sent from the PC, etc.
'30' '30' '43' '45' '55' '31' '47' '53' '32' '0D'
00CEU1GS2
• When ID is specified (when the command is sent to the projector with the ID of "01" or "ALL"):
Command sent from the PC, etc.
'30' '30' '3B' '30' '31' '3B' '43' '45' '55'
'31' '47' '53' '32' 'OD'
00;01;CEU1GS2
Status code returned
from the projector
'30' '30' '53' '2B' '31' '30' '0D'
00S+10
Status code returned
from the projector
'30' '30' '3B' '30' '31' '3B' '53' '2B' '31' '30' '0D'
00;01;S+10
Status code returned
from the projector
'30' '30' '43' '45' '55' '31' '47' '53' '32' '0D'
00CEU1GS2
Status code returned
from the projector
'30' '30' '3B' '30' '31' '3B' '43' '45' '55'
'31' '47' '53' '32' 'OD'
00;01;CEU1GS2
15
Description
Command for checking the
TINT setting (ID command is
omitted.)
Check result (+10)
(The statuses are echoed back
as many as the number of the
connected projectors.)
Description
Command for checking the
TINT setting is sent to the
projector with the ID of "01" or
"ALL."
Check result (+10)
(The status is echoed back
from the projector with the ID
of "01" or "ALL.")
Description
Command for setting the
picture control (ID command is
omitted.)
Command receipt confirmation
(The statuses are echoed back
as many as the number of the
connected projectors.)
Description
Command for setting the
GAMMA MODE of the COLOR
ENHANCER-USER is sent to
the projector with the ID of "01"
or "ALL."
Command receipt confirmation
(The status is echoed back
from the projector with the ID
of "01" or "ALL.")
Advertisement
Table of Contents
