Projectorview; Using The Projectorview; How To Start Up - Mitsubishi WD3300U User Manual

ProjectorView

Using the ProjectorView

This section describes ProjectorView, a tool to control and monitor the projector's operations by a Web browser.
The major functions of ProjectorView are:
• Power on/off
• Input source switching
• State information indication (projector's name, temperature, lamp operation time, error/alert, etc.)
• E-mail notification in case of error/alert

How to start up

1
Start the Projector-Control Device Installer.
• Select [Start] - [All Programs] - [Projector] -
[Projector-Control Device Installer] (in the case of
Windows XP).
®
2
Expand the tree structure on the left pane until the IP
address you set appears.
3
Select the WEB Configuration tab.
4
Click the External Browser button or Go button.
(External Browser button) : The browser starts on a separate window.
(Go button)
(Note)
• You can start ProjectorView by directly entering the URL of the Web browser "http://IP address you
set" instead of by clicking the External Browser button.
• When you are using a proxy server, don't enable the proxy when accessing this IP address.
• You can open only 1 browser screen from the device installer.
• It is possible to control a projector using 2 computers running "ProjectorView". However, use only 1
computer for Telnet setting.
: The browser starts on the Projector-Control Device Installer window.
EN-12