ProjectorView (continued)
Initial setting
To. load. information. on. the. projector. such. as. model. name. and. lamp. operating. time,. set. the. projector. data. in.
advance.. Click. the. SETUP. button. on. the. ProjectorView. main. screen.. The. Projector. Setup. screen. appears.. Enter.
data.according.to.the.description.of.each.setting.item..
(Note)
•. You.can't.change.the.Projector.model,.Serial.number,.Operating.hours,.and.Lamp.hours..They.are.loaded.from.the.
projector.and.displayed.when.the.LAN.controlled.mode.of.Telnet.setting.is.set.to.ON..
•. The.entry.field.of.each.setting.item.contains.a.blank.character.by.default..When.setting.these.items,.delete.the.blank.
characters..
Each.setting.item.is.described.as.follows:.
Projector.name*
Projector.model
Projector.location*
Serial.number
SMTP.IP.address*
E-mail.address*
E-mail.host*
E-mail.from*
Operating.hours
Lamp.hours
Installation.date*
Last.lamp.replacement.date* Date.when.the.lamp.was.last.replaced
Last.maintenance.date* Date.when.the.projector.was.last.maintenanced
Virtual.remote.enabled Display.or.hide.the.virtual.remote.controller.(Check.the.box.to.display.)
*.).For.data.entry,.use.single-byte.alphanumeric.characters.and.symbols. (+.-./.=.@.*._.!.?...,.;.:.#.$.%.&.(.).|.<.>.[.].{.}.".') .
(Note)
When. the. "Standard". lamp. mode. is. selected,. the. indicated. lamp. operating. time. may. exceed. the. indicated.
operating.time..
Name.to.identify.the.projector.
Model.name.of.the.projector
Location.of.the.projector
Serial.number.of.the.projector
IP.address.of.the.SMTP.server.used.for.e-mail.transmission .( Example:.92.68.0. )
e-mail.address.to.receive.alert.notification.e-mail. ( Example:.administrator@XXX.XXX.XXX ).(up.to.64.characters)
User-defined.string.displayed.at.the.Internet.header.of.e-mail.message .( Example:.user )
Sender.of.alert.notification.e-mail. ( Example:.PJView@XXX.XXX.XXX )
Cumulative.projector.operating.time
Cumulative.lamp.operating.time.calculated.based.on.that.LAMP.MODE.is.LOW.
Date.when.the.projector.was.installed
EN-5